Skip to content

Audioquest Tower 2 RCA to 2 RCA Audio Cable Pair

£23.95

AudioQuest Tower 2 RCA to 2 RCA Audio Cable

 The new entry point in the series, Tower, employs solid Long-Grain Copper (LGC) conductors, and many features used throughout the Bridges & Falls lineup, including Asymmetrical Double-Balanced Geometry, Foamed-Polyethylene insulation, Metal-Layer Noise-Dissipation System (NDS), and Cold-Welded Gold-Plated RCA plugs. Compared with the next step up the line, Evergreen, Tower uses slightly smaller conductors for cost-effective performance. 

Features :

  • Solid Long-Grain Copper Conductors (LGC)
  • Foamed-Polyethylene Insulation
  • Metal-Layer Noise-Dissipation System (NDS)
  • Double-Balanced Asymmetrical Geometry
  • Cold-Welded Gold-Plated RCA Plugs

 

Solid Long-Grain Copper Conductors (LGC) :

Strand interaction is the single greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors avoid many strand-interaction distortion mechanisms. Solid-core conductors offer a complete and compelling solution to this problem.

Conductor metal quality is critical for the best cable performance. The conductor surface is the only area of the conductor with 100% current density at all frequencies. The smoothness of the conductor surface is imperative because the surface is a guide rail for the entire energy envelope. The best copper and silver conductor metals have fewer grain boundaries and low oxygen content for low distortion and high performance.

Solid conductors eliminate strand-interaction distortion. Tower's solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

 

Foamed-Polyethylene Insulation :

Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a "dielectric" because it is inside the conductor's magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.

Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

 

Metal-Layer Noise-Dissipation System (NDS) :

100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.

The Tower ultilises the Metal-Layer Noise-Dissipation System (NDS) tprevent most RFI from reaching the equipment’s ground plane.

 

Double-Balanced Asymetrical Geometry :

Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.

Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

 

Directionality 

AudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.

 

Cold-Welded Gold-Plated RCA Plugs :

AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable. 

To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.

AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. Wherever possible, gold connectors are plated directly over the copper, with no destructive intermediate layer of nickel or alloy, while all silver-plated connectors are Direct-Silver plated.

AudioQuest has incorporated Cold-Weld connection technology into most of their interconnects and all prepared speaker cables..

Joining conductors to plugs requires every bit as much care and precision as any other aspect of cable manufacture. AudioQuest's Cold-Weld System uses several tons of pressure to make a near-perfect connection that ensures that the structural integrity of the conductor and plug is kept completely intact, all without the damaging effect of heat. Cold-Welding avoids the introduction of heat and extra materials like solder, which change the character of the wire at the point of termination.

  • Geometry: Asymmetrical Double-Balanced (lower impedance on ground, same quality + & - conductors)
  • Metal: Solid Long-Grain Copper (LGC) Conductors
  • Dielectric: Foamed-Polyethylene Insulation
  • Noise-Dissipation System (NDS): Metal-Layer Noise-Dissipation System
  • RCA Plugs: Cold-Welded, Gold-Plated
  • Jacket Colour: Black/white stripe PVC

We use DHL for domestic and international orders by default.

For orders over £150.00, delivery in the UK is FREE.

For all other orders below £150.00, shipping charges are based on weight and/or item size. 

Local collection is available (please contact us to check availability and to book your collection slot) from our demo room.

Certain product(s) are not stock items. Where items are special order - you'll receive your package the next day from when stock arrives. We'll let you know the rough ETA on placing your order but please do contact us if your order is urgent.

During the checkout process, you're able to select PayPal as a payment method.

For qualifying purchases and subject to status, you may be offered PayPal Credit - a flexible payment method.

A 0% interest offer you can use again and again.

PayPal's 0% interest offer is better than just an introductory offer. Simply spend over £99 and you get 0% interest for 4 months on that purchase. The great thing is you’ll automatically get 0% for 4 months every time you spend over £99. So, if you’re planning a weekend away or fancy splashing out on a new wardrobe, PayPal Credit is the perfect way to spread the cost of those larger purchases.

It’s quick and easy to apply for PayPal Credit – all you need to do is complete a short application form and we’ll give you a decision instantly. If approved and you accept, you’ll have a credit limit attached to your PayPal account to start using straightaway at thousands of online stores.

More information on PayPal Credit is available here.

Note - Yorkshire AV LTD have no interaction with PayPal during this process. For terms and conditions, please see the PayPal website.

PayPal Credit