










Dali
DALI Rubicon 6 speakers
Colour
Available to demo in store
RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.
The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.
The gracefully elegant exterior of the Rubicon works as the base for the low loss drivers. In every cabinet, the mid-range and bass drivers are separated into their own chambers. Turbulence is minimized through a bass reflex port, which is placed directly behind every woofer, and the timing between the woofer and the bass port is thereby also optimized.
The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.
SMC MAGNET SYSTEM
With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.
HYBRID TWEETER MODULE
The hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.
WOOD FIBRE CONES
Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.
CABINET CONSTRUCTION
Dividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.
Specification
Speaker Type | Front Rear Surround |
---|---|
Frequency Range (+/-3 dB) [Hz] | 38 - 34,000 |
Sensitivity (2,83 V/1 m) [dB] | 88.5 |
Nominal Impedance [Ω] | 4 |
Maximum SPL [dB] | 110 |
Recommended Amplifier Power [W] | 40 - 200 |
Crossover Frequency [Hz] | 800/ 2,600/ 14,000 |
Crossover Principle | 2½ + ½-way |
High Frequency Driver | 1 x 17 x 45 mm Ribbon 1 x 29 mm Soft Textile Dome |
Low Frequency Driver | 2 x 6½" Wood Fibre Cone |
Enclosure Type | Bass Reflex |
Connection input(s) | Bi-Wire |
Magnetic Shielding | No |
Recommended Placement | Floor |
Recommended Distance From Wall | 20cm - 180cm |
Dimensions With Base (HxWxD) | 990mm x 200mm x 380mm |
Weight | 20.2kg |
Accessories Included | Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 |
Finish | Black High Gloss Lacquer Rosso Veneer Walnut Veneer White High Gloss Lacquer |