Podium XL HiFi Rack
Earning a 5-star review in What Hi Fi? November 2012 edition, the Podium XL was praised on its ability to ‘convey oodles of weight, and plenty and refinement too’. The Podium XL is a great choice for those wanting to highlight their hi-fi components, and with the optional TV Bracket you can mount your TV too so that all your technology sits together in your room.
As with our other Podium racks, it can be easily adapted and upgrade as your system grows and changes. Made from 40mm solid hardwoods and 46mm2 hardwood legs, this rack also provides the same stiffness and stability that Hi Fi Racks prides itself on.
Per tier charge = from £171.68 [oak]
Please contact us if you require any of the following
The first photo depicts a three-tier Podium Reference in solid walnut.
Our standard heights are 65mm, 85mm, 100mm, 120mm, 150mm, 200mm, 250mm & 300mm. A member of the team will be in touch once checkout is complete to confirm your spacing.
Note - items are made to order.
150kg per tier
- Smaller than - External: 445 x 400mm, Internal: 333 x 400mm
- External: 595 x 400mm, Internal: 483 x 400mm
- External: 612 x 500mm, Internal: 500 x 500mm
- Any bespoke width, depth or height
Please check internal measurements of rack and external measurements of equipment to ensure the correct fit for your set-up.
When selecting the appropriate leg height for your rack, this is the clearance between the two plinths including the spike, but please note that this does not include the thickness of the plinths (40mm). Any leg length is available at no extra cost, enabling you to specify the exact length to meet your requirements. Don’t forget to leave adequate spacing above items that run hot for effective heat dispersal - the required spacing can usually be found within your product manual.
This offers a tidy storage solution for your vinyl records. When selecting this addition, one of the tiers will be allocated to create this offering, incorporating two extra legs on each side with a rear crossbar for support. This can be made to fit any width and depth. Please note that if you select this option one of the tiers will be allocated to the LP pack. You may wish to add an additional tier for this option if you require the other tiers to fit your equipment.
This offers a neat solution for all of your cables presented at the rear of the rack, manufactured from 22mm thickness wood which will attach to the back of the rack to minimise the cluttered look of messy cables.
Castors are a 65mm high wheel. Selecting the castor option will mean that you will lose the legs on the base level of your rack, with castors manufactured directly into the base plinth. Interchangeable legs with castors are available upon request.
Isolation plinths are available in 22mm or 40mm thickness. If selecting an isolation plinth, this will default to 22mm but can be upgraded to 40mm by contacting our team at +44 (0) 01977 666 901. Our 22mm isolation plinths are manufactured from solid oak, so if you have chosen one of our more exotic woods for your rack, please note that the isolation plinth will be a close, but not exact, match in colour with a stain used on the oak. The 40mm isolation plinths will be manufactured from your choice of exotic wood and will match your selected option.