





Yorkshire AV
Yamaha RX-A6A AVR with Q Acoustics Concept 50 5.1 Speaker Package bundle
Finish
Subwoofer
A complete high end Home Cinema package from Yorkshire AV.
Consisting of:
Q Acoustics Concept 50 5.1 (Concept 50 floor standing speakers, Concept 90 centre speaker and Concept 30 bookshelf speakers). Included in this package is the QB12 subwoofer which can be substituted with SVS or REL at your request.
The new Yamaha RX-A6A 9.2 amplifier is included in this package - providing a powerful and capable solution with high quality music streaming, HDMI 2.1 (with a future firmware update), 11.2 channel processing (more channels available with pre-outs) and Auro3D/Dolby Atmos and many other codecs.
Contact us to discuss cabling requirements - we recommend high quality speaker cables for the Concept series speakers (either ATLAS cables or QED).
Details:
Bringing scale and widescreen sound to home movie-watching experience, this package ramps up the intensity and entertainment levels to command your attention. A pair of Concept 50 floorstanding speakers at the front end intensifies the power and dynamics, all without sacrificing any insight and subtlety. This 5.1 set-up is as agile and sophisticated as it is commanding and all-encompassing.
Features
- Gelcore™ cabinet construction reduces higher frequency cabinet noise.
- P2P™ (Point to Point™) internal bracing stiffens the cabinet to minimise lower frequency vibrations.
- Isolation suspension base eradicates unwanted external and internal vibrations.
- The driver assembly is mounted to the front aluminium baffle by pretensioned studs to give the correct acoustic seal, while dampen vibrations and minimise structural coupling of the assembly in main cabinet.
- Ground-up mid/bass and tweeter driver design for increased power handling.
- High-frequency driver is fully hermetically sealed and mechanically isolated (floating) from the front baffle to protect from internal resonances from the mid/bass driver.
- Crossover design is mounted on the isolation base, to minimise any microphonic pick up and away from electro-magnetic fields radiated by the drive units.
Home cinema maestro
Our flagship 5.1 home cinema speaker package is comprised of a pair of Concept 50 floorstanders at the front, a pair of Concept 30 standmounts positioned at the rear, with a Concept 90 centre channel focused on dialogue. Finally, our most powerful subwoofer, the Q B12, provides the low-end sonics. All these speaker models (except Q B12 subwoofer) harbour many anti-resonance technologies that contributed to delivering the most realistic, enthralling and enveloping 5.1 surround sound movie experience in the home.
Controlled power
Designed as an integral part of the mechanical structure of the cabinet, both the 5-inch mid/bass and 0.9-inch tweeter drivers are new, ground-up designs specifically for the Concept 30, 50 and 90 loudspeakers. The drive units are fixed to a remarkably stiff 3mm aluminium baffle plate before it is fitted to the cabinet - this gives the correct acoustic seal, dampening vibrations and minimising structural coupling.
Concept 50
- Bass unit 2 x 125 mm (5.0 in)
- Treble unit 1 x 25 mm (0.9 in)
- Frequency response(-6dB) 42 Hz - 30 kHz
- Nominal impedance 6 Ω
- Minimum impedance 3.6 Ω
- Sensitivity (2.83V @ 1kHz) 90.5 dB/w/m
- Recommended amplifier power 25-150 W
- Crossover frequency 2.1 kHz
- Distortion (120Hz - 20kHz, @2.83Vrms) <0.2%
- Effective volume 28.8 L
- Dimensions (per loudspeaker / HxWxD) Inc spikes and stabiliser: 1025 x 418 x 319 mm (40.4 x 16.5 x 12.6 in), Cabinet width: 180 mm (7.1 in)
- Weight (per loudspeaker) 22.9 kg (50.5 lbs)
Concept 30
- Bass unit 1 x 125 mm (5.0 in)
- Treble unit 1 x 25 mm (0.9 in)
- Frequency response(-6dB) 54 Hz - 30 kHz
- Nominal impedance 6 Ω
- Minimum impedance 3.9 Ω
- Sensitivity (2.83V @ 1kHz) 87 dB/w/m
- Recommended amplifier power 25-100 W
- Crossover frequency 2.4 kHz
- Distortion (120Hz - 20kHz, @2.83Vrms) <0.2%
- Effective volume 7.0 L
- Dimensions (per loudspeaker / HxWxD) 284 x 180 x 319 mm (11.2 x 7.1 x 12.6 in)
- Weight (per loudspeaker) 7.9 kg (17.4 lbs)
Concept 90
- Bass unit 2 x 125 mm (5.0 in)
- Treble unit 1 x 25 mm (0.9 in)
- Frequency response(-6dB) 67 Hz - 30 kHz
- Nominal impedance 6 Ω
- Minimum impedance 3.7 Ω
- Sensitivity (2.83V @ 1kHz) 90 dB/w/m
- Recommended amplifier power 25-150 W
- Crossover frequency 2.1 kHz
- Distortion (120Hz - 20kHz, @2.83Vrms) <0.2%
- Effective volume 11 L
- Dimensions (per loudspeaker / HxWxD) 184 x 550 x 259 mm (7.2 x 21.7 x 10.2 in)
- Weight (per loudspeaker) 12.3 kg (27.1 lbs)